Set up FTP push - Fronius

This article shows how to stet up a FTP push to the SOLYTIC portal.

Connect your inverter to your computer via WLAN or ethernet cable.
Enter the IP address of the inverter in the address line of your browser and confirm with ENTER

  1. Navigate to Settings> Push Service
  2. Choose "+ Add"
  3. A data field opens where the following data must be entered:
    1. Name: Production
    2. Data format: inverter float model
    3. Interval: Choose between 1min to 15min
    4. Server: Port: de-1.pvanalytics.de:21
    5. Upload file name: /production- GenealogieDATE Genealogie {TIME }.xml
    6. Registration with user and password, as sent in the email
    7. Do not activate a proxy
  4. Click the check mark in the top right to save and test the connection

You then need to make one more setting so that the setup can be completed.

  1. Click +Add again
  2. A data field opens where the following data must be entered:
    1. Name: Events
    2. Data format: Errors and Events
    3. Interval: 30 min
    4. Server: Port: de-1.pvanalytics.de:21
    5. Upload file name: /events- GenealogieDATE Genealogie {TIME}
    6. Login with user name and password, as sent in the email from Solytic
    7. Do not activate a proxy
  3. Click the check mark in the top right to save and test the connection

Please contact us, after you finished the steps above