Set up FTP push - ABB

This article show how to set up a FTP push to the SOLYTIC portal.

Please connect your inverter to your computer using a LAN cable.
Access the inverter by entering its IP address in the address line in your browser and confirming with ENTER.

  1. Navigate to Setup> FTP and enter the following information:
    1. FTP server:
    2. Username and password, as sent in the email by Solytic
    3. Please leave server path and prefix free
  2. Select upload test and then save settings
    1. Choose an interval of 10 minutes
    2. Please leave all other settings unchanged

  3. You can add further parameters as you wish
  4. Contact SOLYTIC after you finished with the steps above